MTC-1

H0528 Rear Spring 1.7 (Light Blue) 2pcs

 Rear Spring 1.7 (Light Blue) 2pcs

H0527 Rear Spring 1.6 (Purple) 2pcs

Type a description for this product here...

H0524 Front Spring 1.7 (Light Blue) 2pcs

 Front Spring 1.7 (Light Blue) 2pcs

H0523 Front Spring 1.6 (Purple) 2pcs

Front Spring 1.6 (Purple) 2pcs

Mugen Seiki

A2144 Alum Lower Arm Mount Insert: MTC

Alum Lower Arm Mount Insert: MTC   This is a new aluminum lower arm mount for the MTC1.  This replaces the plastic A2108B insert.  The aluminum inserts increase durability and allow for a more ridge shock mount to increase consistency...

Mugen Seiki

A2143 Metal Bushing for C-Hub (4pcs): MTC1

This is a bag of 4 metal bushing that are used with either A2141L/R aluminum front c-hub carriers for the MTC1

Mugen Seiki

A2141R Aluminum Front C-Hub (R): MTC1

This is the Right aluminum front c-hub carrier for the MTC1. This c-hub requires the use of 2 metal bushings (A2143) which are not included. Please keep this in consideration if you are in need of the metal bushings. Using the aluminum front c-hub...

Mugen Seiki

A2141L Aluminum Front C-Hub (L): MTC1

This is the Left aluminum front c-hub carrier for the MTC1. This c-hub requires the use of 2 metal bushings (A2143) which are not included. Please keep this in consideration if you are in need of the metal bushings. Using the aluminum front c-hub...

Mugen Seiki

A2140 Graphite Upper Deck with Pitch Control Rod: MTC1

This graphite pitch control rod system prevents the chassis from bending over the maximum length, as it is fixed from the motor mount to the upper deck. Furthermore the flex of the chassis is not affected from the rod. It improves the acceleration...

Mugen Seiki

A2002 MTC1 Performance Conversion Kit

The A2002 MTC1 Performance Conversion Kit After an intense year of testing and racing, Mugen Seiki is excited to announce information about the MTC1 performance conversion kit. All the new parts were used at the Reedy Race of Champions EU, where all 3...

Mugen Seiki

A2811 Shims (3 x 6 x 0.5)10pcs: MTC1

This is a package of 10 gray anodized aluminum shims (3 x 6 x .5mm) used for adjusting the spacing of the shocks to the front and rear suspension arms. Stock in the MTC1 kits are 1mm and 2mm thick shims, these shims will give you the ability to fine tune...

Mugen Seiki

A2413 Alum Optional Battery Mounts: MTC1

This is a new aluminum rotating battery mount system. Machined from high grade aluminum this battery mount allows for quick battery changes without the need for tape or Velcro anymore. The mounts are adjustable for different thickness batteries, lengths...